LVS + keepalived problem

[Navid Rahimi]

Hi,

I am running RHEL4 ( 2.6.9-42.0.3.ELsmp), ipvsadm v1.24, keepalived v1.1.13.
I can get virtual ip addresses to fail-over but when I add a virtual service
nothing gets added to LVS, ipvsadm -L shows nothing. I compiled both ipvsadm
and keepalived from source. During the compliation I did make sure IPVS
framework/sync daemon support were enabled.  Yet no virtual services show up
in ipvsadm. I am trying to setup a streamlined ha/load balancer i.e. the LVS
router and real servers are the same.
VIP: 10.1.1.100
LVS routers/real servers :10.1.1.20, 10.1.1.30

Any help or suggestions would be greatly appreciated.

Thanks,
Navid

In /var/log/messages I see this:
Dec  6 04:45:20 rhel4_2 Keepalived: Starting Keepalived v1.1.13 (12/06,2006)
Dec  6 04:45:20 rhel4_2 Keepalived: Starting VRRP child process, pid=11272
Dec  6 04:45:20 rhel4_2 Keepalived_vrrp: Using MII-BMSR NIC polling
thread...
Dec  6 04:45:20 rhel4_2 Keepalived_vrrp: Registering Kernel netlink
reflector
Dec  6 04:45:20 rhel4_2 Keepalived_vrrp: Registering Kernel netlink command
channel
Dec  6 04:45:20 rhel4_2 Keepalived_vrrp: Registering gratutious ARP shared
channel
Dec  6 04:45:20 rhel4_2 Keepalived_vrrp: Configuration is using : 33370
Bytes
Dec  6 04:45:20 rhel4_2 Keepalived_vrrp: VRRP sockpool: [ifindex(2),
proto(112), fd(7,8)]
Dec  6 04:45:21 rhel4_2 Keepalived_vrrp: VRRP_Instance(VI_1) Transition to
MASTER STATE
Dec  6 04:45:22 rhel4_2 Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER
STATE
Dec  6 04:45:22 rhel4_2 Keepalived_vrrp: VRRP_Instance(VI_1) setting
protocol VIPs.
Dec  6 04:45:22 rhel4_2 Keepalived_vrrp: VRRP_Instance(VI_1) Sending
gratuitous ARPs on eth0 for 10.1.1.100

my keepalived.conf for master server, backup is the same with exception to
state=BACKUP and priority=50
vrrp_instance VI_1 {
  state MASTER
  interface eth0
  virtual_router_id 1
  priority 100
  authentication {
    auth_type PASS
    auth_pass pass!
  }
  virtual_ipaddress {
    10.1.1.100/24 brd 10.1.1.255 dev eth0
  }
}
virtual_server 10.1.1.100 80 {
        delay_loop 30
        lb_algo wrr
        lb_kind NAT
        persistence_timeout 50
        protocol TCP
        real_server 10.1.1.20 80 {
                weight 10
                HTTP_GET {
                        url {
                                path test.html
                                digest 46cfdd158b0cebd418a1770ab2841aa7
                        }
                        connect_port 80
                        connect_timeout 3
                        nb_get_retry 3
                        delay_before_retry 1
                }
        }

        real_server 10.1.1.30 80 {
                weight 10
                HTTP_GET {
                        url {
                                path test.html
                                digest fd26b1d1c75fff7184241b0a4b0dccb7
                        }
                        connect_port 80
                        connect_timeout 2
                        nb_get_retry 3
                        delay_before_retry 1
                }
        }
}

output from configure:

Keepalived configuration
------------------------
Keepalived version       : 1.1.13
Compiler                 : gcc
Compiler flags           : -g -O2
Extra Lib                : -lpopt -lssl -lcrypto
Use IPVS Framework       : Yes
IPVS sync daemon support : Yes
Use VRRP Framework       : Yes
Use LinkWatch            : No
Use Debug flags          : No



-- 
"We make a living by what we get, we make a life by what we give."
-Sir Winston Churchill (1874 - 1965)