Cluster Help

José María Lopez Marzal jmlopez at infogroup.es
Fri Mar 31 08:39:01 BST 2006


Hi,

Do you have the same configuration (files Heartbeat) in the two Server? Is necessary the two server have the same file configuration in the config file of Heartbeat.

You need used different network for the director and real server.

Good luck.

José María López

-----Mensaje original-----
De: Subhankar Sengupta [mailto:subhankar_sngpt at yahoo.com] 
Enviado el: viernes, 31 de marzo de 2006 7:27
Para: lvs-users at LinuxVirtualServer.org
Asunto: Cluster Help

Hello Gurus,
  I need to install linux cluster for my lab. I am using HP proliant DL 380 G4 servers( 2 nodes) it has a shared storage which is connected via external SCSI ports.
  Both the servers has two NIC.
  Let me tell you what I have done, I have connected eth0 of server A(Active) with
  eth0 of server P(Passive) directly using a cross cable, but I have not assigned any IP address to them.
  eth1 of Server A and P is connected to a HUB. I have assigned 192.168.0.1 and
  192.168.0.2 to them.
  Now I have installed Hearbeat software and dependencies. Then I have configured
  authkeys,ha.cf and ha resources.
   
  This is exactly how my haresources file looks like.
  /etc/ha.d/haresources
  -----------------------------------
  active.lab.com 192.168.0.10 Filesystem::/dev/sda1:/var/ftp/pub::ext3 vsftpd httpd
                         ------------------
                         Floating IP
  At the end I have started heartbeats but I HA is not working, I am using RHEL4(ES).
  Please help me to build this.
   
  Regards,
  Sen.
  (FOSS shall overcome)

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users at LinuxVirtualServer.org
Send requests to lvs-users-request at LinuxVirtualServer.org
or go to http://www.in-addr.de/mailman/listinfo/lvs-users




More information about the lvs-users mailing list