Linux-ha Heartbeat startup problem
Matthew Story
matthewstory at gmail.com
Fri May 12 18:45:05 BST 2006
Did you make sure that ldirector d isn't started up by itself? To do
this shut down ldirectord and remove the startup scripts then try
again.
On 5/12/06, Rafael Vallejo <rvallejo at novadevices.com> wrote:
> Hello list
>
> I have been dealing with this from a week ago and have no idea of what
> is happening.
>
> I'm experimenting with linux-ha, for that purpose I have 2 Pentium 3
> machines with Centos 4.2, and heartbeat 2.0.4-1 installed from rpms
> downloaded from Ultramonkey,
> http://www.ultramonkey.org/download/heartbeat/, those machines will be
> runing NFS services 10.0.10.3 is the Active and 10.0.10.4 is the pasive,
> I have just one Ehternet card on each and a NULL Modem cable conecting them.
>
> When I try to start heartbeat I got the following
>
> [root at srv3 ha.d]# service heartbeat start
> logd is already running
> Starting High-Availability services:
> 2006/05/12_12:18:08 INFO: IPaddr Resource is stopped
> [FAILED]
>
> *This is the /etc/ha.d/ha.cf file*
>
> serial /dev/ttyS0
> baud 19200
> logfacility daemon
> keepalive 1
> deadtime 10
> warntime 5
> initdead 120 # depend on your hardware
> udpport 694
> ping 10.0.10.4
> bcast eth0
> auto_failback off
> node srv3
> node srv4
> respawn hacluster /usr/lib64/heartbeat/ipfail
> use_logd yes
>
> *This is the **/etc/ha.d/**haresources file*
>
> srv3.novadevices.local 10.0.10.3 nfs
>
> *And finally this is the /etc/ha.d/authfile*
>
> auth 2
> 2 crc
>
> Any ideas?
>
> --
> Rafael
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users at LinuxVirtualServer.org
> Send requests to lvs-users-request at LinuxVirtualServer.org
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>
--
regards,
matt
Search lvs-users Archives
More information about the lvs-users
mailing list