Keepalived and Vlan configuration ...

[Sébastien CRAMATTE]

I've setup keepealived 1.1.12 with a debian sarge 3.1 

#uname -a
Linux vlanrouter2 2.6.16.18-router.3 #4 Mon Jul 24 01:39:18 CEST 2006 i686 GNU/Linux

My problem is that sometime I loose access to the virtual IP (a simple ping doesn't answer) ...
For example my 88.148.51.201 doesn't answer during somes seconds and come back without do nothing in the userspace ...
Seems that the master server keep virtual IP during this problem ... 

Any ideas of how can I resolve this or test it to provide more details ?


My routers run keepalived on vlan interfaces over bonding of eth0+eth1 
I would like if is should not better to setup one vrrp_instance per virtual IP ?

Tomorrow I will install the 1.1.13 release
Thanks in advance for the help
Regards 


---- master config ----

global_defs {
notification_email {
sysadmins at telelorca.com
}
notification_email_from keepalived at telelorca.com
smtp_server localhost
smtp_connect_timeout 30
lvs_id LVS_MAIN
}

vrrp_instance VI_1 {
 state MASTER
 interface vlan500
 virtual_router_id 1
 lvs_sync_daemon_interface vlan500
 priority 100
 advert_int 1
 track_interface {
  bond0
 }
 authentication {
  auth_type PASS
  auth_pass xxxxx
 }

 virtual_ipaddress {
  88.148.60.4/24 dev vlan100
  84.232.73.177/28 dev vlan300
  88.148.51.201/29 dev vlan800
 }
}


---- backup config ----

# cat /etc/keepalived/keepalived.conf

global_defs {
notification_email {
sysadmins at zensoluciones.com
}
notification_email_from keepalived at zensoluciones.com
smtp_server localhost
smtp_connect_timeout 30
lvs_id LVS_MAIN
}

vrrp_instance VI_1 {
 state BACKUP
 interface vlan500
 virtual_router_id 1
 advert_int 1
 lvs_sync_daemon_interface vlan500
 priority 50
 advert_int 1
 track_interface {
  bond0
 }
 authentication {
  auth_type PASS
  auth_pass xxxxx
 }

 virtual_ipaddress {
  88.148.60.4/24 dev vlan100
  84.232.73.177/28 dev vlan300
  88.148.51.201/29 dev vlan800
 }