Problems with IPVS
ratz at drugphish.ch
Wed Oct 18 08:08:46 BST 2006
>> Sorry, not on my end. Something ate them in between. Could you upload
>> them somewhere zipped?
Yep, I got them. Funny, if you open them in konqueror, it tries to
display the octets in the packets, resulting in a half-backed webpage
:). Bloody konqueror is too smart!
>>> We are trying to be smart :).
>> I hope not too smart? :)
> On the edge. :)
Definitely, with the kernel versions you're using :).
>> I slowly get it. You have tried to load balance your WAP connections
>> using LVS, but it did not work and you're now DNAT'ing your mobile
>> phones to a single proxy?
> Yes. Just not single proxy. netmask 255.255.0.3 and I'm load balancing
> to 4 proxies.
Have you considered iproute2 nat? We could get a similar functionality
to LVS using stuff like:
ip route add nat 192.168.1.1 via 126.96.36.199
ip rule add nat 192.168.1.1 via 188.8.131.52
>>>> ipvsadm -L -n -c
>>> I'm running everything using DNAT now. ipvs would be much better of
>>> course. And even now there are 6000 lines of output (wap1 9200:9201
>>> udp traffic is still going through ipvs).
>> IPVS must work. I don't yet fully understand your setup. See my second
>> email in this thread.
> As I already said few times. IPVS works for everything but SE phones.
I'll look into this later today,
Roberto Nibali, ratz
'[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq' | dc
More information about the lvs-users