[Ultra Monkey director doesn't accept connection]

[Maverik]

I am not implementing HA, just the LVS. And this is where I am stuck! I
followed the instructions on the UM site to no avail.

I configurred the syslogd to record the ldirector log to
/var/log/ldirectord.log. It did only once and reflected a status 2, error in
configuration. I tried to check again the ldirectord.cf and restarted the
daemon, this time no indication of errors on the /var/log/ldirectord.log and
/var/log/messages. The daemon started okay.

When I do nmap on the virtual IP, there's no available service for HTTP. Is
this normal?

Thanks.


On 4/20/07, Joseph Mack NA3T <jmack at wm7d.net> wrote:
>
> On Fri, 20 Apr 2007, Maverik wrote:
>
> > After several tests, the director doesn't route requests coming from the
> > virtual IP to the nodes. tcpdump is not taking any packets from the
> virtual
> > address on port 80. the director doesn't reroute traffic to the loopback
> > address when connection to the nodes fails (as per fallback parameter
> would
> > instruct).
>
> Ultramonkey is a big package. I would be surprised if you
> could install it from scratch and get it to work without
> extensive checking on the way.
>
> First get the LVS part to work, and then get the HA part to
> work
>
> Joe
>
> --
> Joseph Mack NA3T EME(B,D), FM05lw North Carolina
> jmack (at) wm7d (dot) net - azimuthal equidistant map
> generator at http://www.wm7d.net/azproj.shtml
> Homepage http://www.austintek.com/ It's GNU/Linux!
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users at LinuxVirtualServer.org
> Send requests to lvs-users-request at LinuxVirtualServer.org
> or go to http://www.in-addr.de/mailman/listinfo/lvs-users
>



-- 
Regards,
Maenard

---------------------
"Ability is what you're capable of doing... Motivation determines what you
do... Attitude determines how well you do it."