[lvs-users] Problem with LVS-TUN (not listening)

Joseph Mack NA3T jmack at wm7d.net
Fri Aug 31 21:16:12 BST 2007


On Fri, 31 Aug 2007, Ducassou Laurent-Pierre wrote:

> Hi all,
>
> I have solved the problem with the following commands :
>
> echo 1 > /proc/sys/net/ipv4/all/arp_ignore
> echo 2 > /proc/sys/net/ipv4/all/arp_announce
> echo 1 > /proc/sys/net/ipv4/tunl0/arp_ignore
> echo 2 > /proc/sys/net/ipv4/tunl0/atp_announce
> echo 0 > /proc/sys/net/ipv4/tunl0/rp_filter

I assume this is on the realserver. If so, then the router 
for the realservers is in the same network as the VIP on the 
director, in which case you could use LVS-DR.

Joe


>
> LVS:TUN works now :)
>
> Thank you !!!
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.484 / Virus Database: 269.12.12/979 - Release Date: 29/08/2007
> 20:21
>
>
>
> _______________________________________________
> LinuxVirtualServer.org mailing list - lvs-users at LinuxVirtualServer.org
> Send requests to lvs-users-request at LinuxVirtualServer.org
> or go to http://lists.graemef.net/mailman/listinfo/lvs-users
>

-- 
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!




More information about the lvs-users mailing list